在2017年的日内瓦车展上，“奥迪”和“空中客车”两家公司联合展示了“POP.UP”概念飞行汽车！目前这个设计还处于研究阶段！由于技术过于复杂和超前！

如果需要飞行，飞行器过来，直接自动衔接在车顶，然后车体脱离底盘，就变成飞行器了。奥迪和保时捷两家公司计划在2020年之前，测试公司的第一个原型产品，从中收集详细的测试数据，从而确定未来该项目是否有必要继续深入研究下去。

Pop.Up.NEXT由奥迪、空客以及意大利汽车设计公司Italdesign（为玛莎拉蒂设计了第一款运动型SUV）联合打造。这款飞行汽车有别于以上几款车型，采用了分体式设计，可以自由组合。该车的飞行模块采用了4轴8桨的公理系统，飞行的时候并不是让整台车起飞，而是只让飞行模块和座舱部分对接，无人驾驶底座会自动分离，整个行驶过程将有自动驾驶技术完成，需要人为操作的环节很少。

英文版

English version
At the 2017 Geneva auto show, "Audi" and "Airbus" jointly demonstrated the concept of "pop. Up" flying car! At present, this design is still in the research stage! Because the technology is too complex and advanced!

If you need to fly, the aircraft comes over and connects to the roof directly and automatically, and then the car body breaks away from the chassis and becomes an aircraft. Audi and Porsche plan to test the company's first prototype product by 2020, from which detailed test data can be collected, so as to determine whether it is necessary to further study the project in the future.

Pop.up.next is jointly built by Audi, Airbus and Italian car design company Italdesign (the first sports SUV designed for Maserati). This flying car is different from the above models. It has a split design and can be combined freely. The flight module of the vehicle adopts the axiom system of 4-axis and 8-oars. When flying, it does not let the whole vehicle take off, but only lets the flight module and the cockpit part dock. The unmanned base will be separated automatically. The whole driving process will be completed by the automatic driving technology, and there are few links requiring human operation. （文编译/飞行汽车  www.feiauto.com）

---

【版权声明】以上内容来源于网络转载，出于传递信息及学习之目的，不代表本网站的观点、立场，本网站不对其真实性负责。未经原作者feiauto允许不得转载本文内容，否则将视为侵权，本站依法保留追究权！www.feiauto.com

【投稿】请把所需要提交的文章投稿至此邮箱：feiauto@126.com

---